The Best Modern Turntable For 2024

The anti-skate force must be adjusted in conjunction with the tracking force via the dial located near the tonearm. This ensures that the needle does not move sideways.

A turntable's most crucial parts are its stylus and cartridge. The stylus and cartridge pick up the information from the record, convert it to electronic signals and send them to the speakers.
The stylus, or "needle", is what sits inside the grooves of the record. It is crucial to choose the right shape for the stylus. An elliptical stylus will pick up more information than one that has a conical surface because it touches more records. Audiophiles also believe that conical styluses work better with old records because they take up more space after the groove has been expanded through repeated plays.
The stylus is held in the cartridge, which converts its movements into electric signals. The most popular cartridge types are moving magnet (MM), and moving coil (MC). Most turntables will use MM cartridges because they areer and more convenient to change needles. However, MC cartridges can be lighter and pick up more groove changes than MM cartridges. They are also more costly.

The track force refers to the downward pressure that the cartridge exerts on the record through the stylus. A suggested tracking force will be included with your turntable.
Adjusting the track force can be delicate, but this is worth it to improve sound quality. You also have a lower chance of damaging your records by too much downward force.
Adjusting the counterweight at the back of your tonearm can change the tracking force. First, balance the tonearm horizontally. Next, twist the counterweight to get the right downforce (as indicated in the instruction).

These numbers are the revolutions per minute (rpm) of the record. Although most records are 33s in length, there are still 45s and some 78s available (the former are smaller). While most turntables can play both 33rpm or 45rpm, you will need to have an adapter in order to hear the slower version. You'll have to look for an adapter or player that can play 78s.

Pre-amps convert the turntable's "phono" signal into a stronger signal called "line", so that it is compatible with speakers, headphones and other audio equipment. You can either use an amplifier that has a separate phono line or buy a standalone pre-amp if the turntable does not have one.
Some turntables come with switchable preamps that can be switched on and off depending on the plugging device.

Playing vinyl has the biggest drawback of having to reach at each end and turn it over. A fully automatic turntable uses a machine on the tonearm to put the needle on the record and play it. Then, at the end of the track, it lifts the record up to return it to its cradle.
The extra electric signals along the tonearm and the mechanical movement are what audio purists believe affect the sound. Full-auto, however, is the best option if you don't want to have to stand up for half an hour every time.

Two types of drive are available for turntables: direct and belt.
Models with direct drive motors are mounted beneath the platter. In a belt drive, the motor is attached to one end by a rubber belt. The turntable can be spun at higher speeds and is compacted by direct drives. Belt models, on the other hand, isolate any extra noise from the motor.